Accounting Dot1X; Accounting Exec - Edge-Core ECS4810-12M Layer 2 Management Manual

E
XAMPLE
This command applies an accounting method for 802.1X service requests

accounting dot1x

on an interface. Use the no form to disable accounting on the interface.
S
YNTAX
D
None
C
Interface Configuration
E
XAMPLE
This command applies an accounting method to local console, Telnet or

accounting exec

SSH connections. Use the no form to disable accounting on the line.
S
YNTAX
D
None
C
Line Configuration
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the
accounting dot1x
list-name - Specifies a method list created with the
dot1x command.
S
EFAULT ETTING
M
OMMAND ODE
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the
accounting exec command.
list-name - Specifies a method list created with the
exec command.
S
EFAULT ETTING
M
OMMAND ODE
– 819 –
C 24
HAPTER
command.
| Authentication Commands
AAA
aaa
aaa accounting
aaa
aaa accounting