Setting A Time Range - Edge-Core ECS4810-12M Layer 2 Management Manual

denied (because the decision to deny a packet has a higher priority for
security reasons). A packet will also be denied if the IP ACL denies it
and the MAC ACL accepts it.
Use the Security > ACL (Configure Time Range) page to sets a time range
S
ETTING A
during which ACL functions are applied.
T R
IME ANGE
CLI R
EFERENCES
"Time Range" on page 745
◆
C
OMMAND
If both an absolute rule and one or more periodic rules are configured for
the same time range (i.e., named entry), that entry will only take effect if
the current time is within the absolute time range and one of the periodic
time ranges.
P
ARAMETERS
These parameters are displayed:
Add
Time-Range Name – Name of a time range. (Range: 1-16 characters)
◆
Add Rule
Time-Range – Name of a time range.
◆
Mode
◆
Absolute – Specifies a specific time or time range.
■
■
Periodic – Specifies a periodic interval.
■
■
U
SAGE
Start/End – Specifies the hours, minutes, month, day, and year
at which to start or end.
Start/To – Specifies the days of the week, hours, and minutes
at which to start or end.
– 357 –
| Security Measures
C 13
HAPTER
Access Control Lists