Table of Contents
Advertisement
C
ONFIGURING
S
DNS H
TATIC
OST TO
A
E
DDRESS
NTRIES
Figure 343: Showing the List of Name Servers for DNS
Use the IP Service > DNS - Static Host Table (Add) page to manually
configure static entries in the DNS table that are used to map domain
names to IP addresses.
CLI R
EFERENCES
"ip host" on page 1354
◆
"show hosts" on page 1358
◆
C
U
OMMAND
SAGE
Static entries may be used for local devices connected directly to the
◆
attached network, or for commonly used resources located elsewhere
on the network.
P
ARAMETERS
These parameters are displayed:
Host Name – Name of a host device that is mapped to one or more IP
◆
addresses. (Range: 1-127 characters)
IP Address – IPv4 or IPv6 address(es) associated with a host name.
◆
W
I
EB
NTERFACE
To configure static entries in the DNS table:
Click IP Service, DNS, Static Host Table.
1.
Select Add from the Action list.
2.
Enter a host name and the corresponding address.
3.
Click Apply.
4.
– 589 –
| IP Services
C
16
HAPTER
Domain Name Service
Advertisement
Chapters
Table of Contents
