Showing Acl Hardware Counters - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

Figure 204: Showing the VLANs to Mirror

Use the Security > ACL > Configure Interface (Show Hardware Counters)

page to show statistics for ACL hardware counters.

"show access-list" on page 947

"clear access-list hardware counters" on page 946

These parameters are displayed:

Port – Port identifier. (Range: 1-12)

Type – Selects the type of ACL.

Direction – Displays statistics for ingress or egress hits.

Query – Displays statistics for selected criteria.

ACL Name – The ACL bound this port.

Action – Shows if action is to permit or deny specified packets.

Rules – Shows the rules for the ACL bound to this port.

Time-Range – Name of a time range.

Hit – Shows the number of packets matching this ACL.

Clear Counter – Clears the hit counter for the specified ACL.

To show statistics for ACL hardware counters:

Click Security, ACL.

Select Configure Interface from the Step list.

Select Show Hardware Counters from the Action list.

6. Due to a hardware limitation, statistics are only displayed for permit rules.

| Security Measures

Access Control Lists

Chapters

Table of Contents