Show Ip Igmp Snooping Group - Edge-Core ECS4810-12M Layer 2 Management Manual

| Multicast Filtering Commands
C 39
HAPTER
IGMP Snooping
show ip igmp
snooping group
E
XAMPLE
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP Snooping
Router Port Expire Time
Router Alert Check
Router Port Mode
TCN Flood
TCN Query Solicit
Unregistered Data Flood
802.1p Forwarding Priority
Unsolicited Report Interval
Version Exclusive
Version
Proxy Reporting
Querier
VLAN 1:
--------
IGMP Snooping
IGMP Snooping Running Status
Version
Version Exclusive
Immediate Leave
Last Member Query Interval
Last Member Query Count
General Query Suppression
Query Interval
Query Response Interval
Proxy Query Address
Proxy Reporting
Multicast Router Discovery
VLAN Static Group Port
---- --------------- --------
1 224.1.1.1 Eth 1/ 1
. .
.
This command shows known multicast group, source, and host port
mappings for the specified VLAN interface, or for all interfaces if none is
specified.
S
YNTAX
show ip igmp snooping group [host-ip-addr ip-address interface |
igmpsnp | sort-by-port | user | vlan vlan-id [user | igmpsnp]]
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
igmpsnp - Display only entries learned through IGMP snooping.
– 1196 –
: Enabled
: 300 s
: Disabled
: Forward
: Disabled
: Disabled
: Disabled
: Disabled
: 400 s
: Disabled
: 2
: Disabled
: Disabled
: Enabled
: Inactive
: Using global Version (2)
: Using global status (Disabled)
: Disabled
: 10 (unit: 1/10s)
: 2
: Disabled
: 125
: 100 (unit: 1/10s)
: 0.0.0.0
: Using global status (Disabled)
: Disabled