Ipv6 Mld Max-Groups Action; Ipv6 Mld Query-Drop - Edge-Core ECS4810-12M Layer 2 Management Manual

Hide thumbs Also See for ECS4810-12M Layer 2:

Table of Contents

| Multicast Filtering Commands

MLD Filtering and Throttling

max-groups action

If the maximum number of MLD groups is set to the default value, the

running status of MLD throttling will change to false. This means that

any configuration for MLD throttling will have no effect until the

maximum number of MLD groups is configured to another value.

Console(config)#interface ethernet 1/1

Console(config-if)#ipv6 mld max-groups 10

Console(config-if)#

This command sets the MLD throttling action for an interface on the switch.

ipv6 mld max-groups action {deny | replace}

deny - The new multicast group join report is dropped.

replace - The new multicast group replaces an existing group.

Interface Configuration (Ethernet)

When the maximum number of groups is reached on a port, the switch can

take one of two actions; either "deny" or "replace." If the action is set to

deny, any new MLD join reports will be dropped. If the action is set to

replace, the switch randomly removes an existing group and replaces it

with the new multicast group.

Console(config)#interface ethernet 1/1

Console(config-if)#ipv6 mld max-groups action replace

Console(config-if)#

This command drops any received MLD query packets. Use the no form to

restore the default setting.

[no] ipv6 mld query-drop

Chapters

Table of Contents