Create Wac User - Panasonic ZEQUO 6400 Operating Instructions Manual

89.10. create wac user

 Description
This command is used to create accounts for Web-based Access Control. This user
account is independent of the login user account. If VLAN is not specified, the user
will not get a VLAN assigned after the authentication.
 Format
create wac user <username 15> {[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
 Parameters
<username 15>
Specify the user account for Web-based Access Control.
vlan (Optional) Specify the authentication VLAN name.
<vlan_name 32>
Specify the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid (Optional) Specify the authentication VLAN ID number.
<vlanid 1-4094>
Specify the authentication VLAN ID number. The VLAN ID must be between 1 and
4094.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To create a WAC account:
Zxxx0:admin# create wac user abc vlanid 123
Command: create wac user abc vlanid 123
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
Zxxx0:admin#
89. Web-based Access Control (WAC) Commands
1009