Igmp Snooping Configuration - Panasonic PN28168 Operation Manual

4.6.8.

IGMP Snooping Configuration

On the Advanced Switch Configuration Menu, pressing "I" opens the IGMP Snoop-
ing Configuration Menu screen as shown in Fig. 4-56. When you use an IP multi-
cast application, such as a video-conference system and video/audio delivery
system, this function prevents multicast packets from being sent to all ports and
using up the bandwidth.
In addition, the Multicast filtering function can prevent multicast packets from
being sent to any ports other than specified ones and the router port even if a mul-
ticast group is not created.
PN28168 Local Management System
Advanced Switch Configuration -> IGMP Snooping Configuration Menu
IGMP Snooping Status
Multicast Filtering Status: Disabled
Host Port Age-Out Time
Report Forward Interval
VLAN ID Group MAC Address Group Members
------- ----------------- --------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set I[G]MP Snooping Status Set Report [I]nterval
Set M[u]lticast Filtering Set [L]eave Mode
Command>
Enter the character in square brackets to select option
Screen Description
IGMP Snooping Status
Multicast Filtering Status
Host Port Age-Out Time
Router Port Age-Out
Timer
Report Forward Interval
VLAN ID
Group MAC Address
Group Members
: Disabled
: 260 sec
: 5 sec
Set [H]ost Port Aged Time
Set [R]outer Port Aged Time Show Router Port [T]able
Fig. 4-56 IGMP Snooping Configuration
Displays the IGMP Snooping function status.
Enabled IGMP Snooping is enabled.
Disabled IGMP Snooping is disabled.
Displays the Multicast filtering function status.
Enabled The Multicast filtering function is enabled.
Disabled The Multicast filtering function is disabled.
Displays the time until the host port is automatically opened after a mul-
ticast leaves the group. The factory default setting is 260 seconds.
Displays the time until the router port is automatically opened.
The factory default setting is 125 seconds.
Displays the Proxy Report waiting time.
The factory default setting is 5 seconds.
Displays the VLAN ID of the multicast group.
Displays the MAC address of the multicast group.
Displays member ports of the multicast group.
Router Port Age-Out Time : 125 sec
Show [V]LAN Filter Table
Set Static [M]ember Port
[Q]uit to previous menu
124