4.8.14 clear signal-contact
This command clears the signal-contact output configuration.
Switches the signal contact 1´s mode to auto and its manual setting to open.
Switches the signal contact 2´s mode to manual and its manual setting to
closed.
Enables the monitoring of the power supplies for signal contact 1 only.
Disables the sending of signal contact traps.
Format
clear signal-contact
Mode
Privileged EXEC
4.8.15 clear traplog
This command clears the trap log.
Format
clear traplog
Mode
Privileged EXEC
226
4.8 System Utilities
CLI L2E
Release 8.0 05/2013