Snmp-Server Community Mode - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.41 snmp-server community mode

This command activates an SNMP community. If a community is enabled, an
SNMP manager associated with this community manages the switch accord-
ing to its access right. If the community is disabled, no SNMP requests using
this community are accepted. In this case the SNMP manager associated
with this community cannot manage the switch until the Status is changed
back to Enable.
Default
The default private and public communities are enabled by default.
The four undefined communities are disabled by default.
Format
snmp-server community mode <name>
Mode
Global Config
no snmp-server community mode
U
This command deactivates an SNMP community. If the community is
disabled, no SNMP requests using this community are accepted. In this
case the SNMP manager associated with this community cannot
manage the switch until the Status is changed back to Enable.
Format
no snmp-server community mode <name>
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
111