Set Igmp Interfacemode; Set Igmp Lookup-Interval-Unknown - Hirschmann RS20 Reference Manual

4.6.22 set igmp interfacemode

This command enables IGMP Snooping on all interfaces.
Format
set igmp interfacemode
Mode
Global Config
no set igmp interfacemode
U
This command disables IGMP Snooping on all interfaces.
Format
no set igmp interfacemode
Mode
Global Config

4.6.23 set igmp lookup-interval-unknown

This command configures the IGMP Snooping lookup response time for
unknown multicast frames (unit: seconds, min.: 2, max.: 3,599, default: 125).
Format
set igmp lookup-interval-unknown <2-3599>
Mode
Global Config
<2-3599>
Enter the IGMP Snooping lookup response time for unknown multi-
cast frames (unit: seconds, min.: 2, max.: 3,599, default: 125).
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
157