Management Commands; Transport Input Telnet - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4 Management Commands

These commands manage the switch and show current management
settings.

4.4.1 transport input telnet

This command regulates new telnet sessions. If sessions are enabled, new
telnet sessions can be established until there are no more sessions
available. If sessions are disabled, no new telnet sessions are established.
An established session remains active until the session is ended or an
abnormal network error ends the session.
Default
enabled
Format
transport input telnet
Mode
Line Config
no transport input telnet
U
This command disables telnet sessions. If sessions are disabled, no new
telnet sessions are established.
Format
no transport input telnet
Mode
Line Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
79