Clear Pass; Clear Signal-Contact - Hirschmann RS20 Reference Manual

4.7.9

clear pass

This command resets all user passwords to the factory defaults without pow-
ering off the switch. You are prompted to confirm that the password reset
should proceed.
Format
clear pass
Mode
Privileged EXEC

4.7.10 clear signal-contact

This command clears the signal-contact output configuration.
Switches the signal contact 1´s mode to auto and its manual setting to open.
Switches the signal contact 2´s mode to manual and its manual setting to
closed.
Enables the monitoring of the power supplies for signal contact 1 only.
Disables the sending of signal contact traps.
Format
clear signal-contact
Mode
Privileged EXEC
CLI L2B
Release 4.0 11/07
4.7 System Utilities
137