Command; Parameters; Values - Hirschmann RS20 Reference Manual

Command Structure

1.1.1 Command

The text in courier font is to be typed exactly as shown.

1.1.2 Parameters

Parameters are order dependent.
Parameters may be mandatory values, optional values, choices, or a combi-
nation.
D
<parameter>. The <> angle brackets indicate that a mandatory param-
eter is to be entered in place of the brackets and text inside them.
D
[parameter]. The [] square brackets indicate that an optional parame-
ter may be entered in place of the brackets and text inside them.
D
choice1 | choice2. The | indicates that only one of the parameters
should be entered.
D
The {} curly braces indicate that a parameter must be chosen from the list
of choices.

1.1.3 Values

macaddr
areaid
CLI L2E
Release 8.0 05/2013
The MAC address format is six hexadeci-
mal numbers separated by colons, for
example 00:06:29:32:81:40.
Area IDs may be entered in dotted-decimal
notation (for example, 0.0.0.1). An area ID
of 0.0.0.0 is reserved for the backbone.
Area IDs have the same form as IP
addresses, but are distinct from IP
addresses. The IP network address of the
1.1 Format
19