Classofservice Ip-Dscp-Mapping - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.2 classofservice ip-dscp-mapping

This command maps an IP DSCP value to an internal traffic class.
The <ipdscp> value is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef.
Format
classofservice ip-dscp-mapping
Mode
Global Config
ipdscp
Enter the IP DSCP value in the range of 0 to 63 or an IP DSCP
keyword (af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef).
trafficclass
Enter the traffic class to map the 802.1p priority (0-3).
no classofservice ip-dscp-mapping
U
This command restores the default mapping of the IP DSCP value to an
internal traffic class.
Format
no classofservice dot1p-mapping
Modes
Global Config
CLI L2E
Release 8.0 05/2013
4.3 Class of Service (CoS) Commands
<ipdscp> <trafficclass>
73