Syslog Commands; Logging Buffered - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.5 Syslog Commands

This section provides a detailed explanation of the Syslog commands. The
commands are divided into two functional groups:
D
Show commands display spanning tree settings, statistics, and other in-
formation.
D
Configuration Commands configure features and options of the device.
For every configuration command there is a show command that displays
the configuration setting.

4.5.1 logging buffered

This command enables logging to an in-memory log where up to 128 logs are
kept.
Default
enabled
Format
logging buffered
Mode
Global Config
no logging buffered
U
This command disables logging to in-memory log.
Format
no logging buffered
126
4.5 Syslog Commands
CLI L2E
Release 8.0 05/2013