Set Igmp Query-Ports-To-Filter - Hirschmann RS20 Reference Manual

4.6.30 set igmp query-ports-to-filter

This command enables or disables the addition of query ports to multicast fil-
ter portmasks. The setting can be enable or disable.
Default
Disable
Format
set igmp query-ports-to-filter {enable | disable}
Mode
Global Config
enable
Addition of query ports to multicast filter portmasks.
disable
No addition of query ports to multicast filter portmasks.
162
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013