Set Pre-Login-Banner Text; Selftest Ramtest - Hirschmann RS20 Reference Manual

4.6.31 set pre-login-banner text

Use this command to set the text for the pre-login banner. The device
displays this banner additionally before login in the CLI and before login in
the graphical user interface.
Default
Empty string
Format
set pre-login-banner text <text>
Mode
Privileged Exec
text
Enter the text for the pre-login banner.
Possible values: Max. 255 characters in the range ASCII code 0x20
(space character, " ") to ASCII code 0x7E (tilde, "~"), except ASCII
code 0x25 (percent sign, "%").
Use "\\n" for new line and " \\t" for tab.

4.6.32 selftest ramtest

Enable or disable the RAM test for a cold start of the device.
Deactivating the RAM test reduces the booting time for a cold start of the de-
vice.
Default: enabled.
Format
selftest ramtest {disable|enable}
Mode
Global Config
selftest ramtest disable
Disable the ramtest.
selftest ramtest enable
Enable the ramtest. This is the default.
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
163