Hirschmann RS20 Reference Manual
  1. Manuals
  2. Brands
  3. Hirschmann Manuals
  4. Switch
  5. RS20 series
  6. Reference manual

Hirschmann RS20 Reference Manual

Web-based interface industrial ethernet switch
Hide thumbs Also See for RS20:
Table of Contents

Advertisement

Quick Links

See also: Programming Manual , Reference Manual
Reference Manual
Web-based Interface
Industrial ETHERNET Switch
RS20
RM Web L2B
Technical Support
Release 5.0 04/09
HAC-Support@hirschmann.de

Advertisement

Table of Contents
loading

Related Manuals for Hirschmann RS20

Summary of Contents for Hirschmann RS20

  • Page 1 Reference Manual Web-based Interface Industrial ETHERNET Switch RS20 RM Web L2B Technical Support Release 5.0 04/09 HAC-Support@hirschmann.de...
  • Page 2 In addition, we refer to the conditions of use specified in the license contract. You can find the current version of this manual on the Internet, on the Hirschmann product pages (www.hirschmann-ac.de). Printed in Germany Hirschmann Automation and Control GmbH Stuttgarter Str.

  • Page 3: Table Of Contents

    Content Content About this Manual Opening the Web-based Interface Basic Settings System Network Software 1.3.1 View the software versions present on the device 1.3.2 Update via file selection 1.3.3 tftp update Port configuration Load/Save 1.5.1 Loading the configuration 1.5.2 Saving the configuration 1.5.3 URL 1.5.4 Deleting a configuration 1.5.5 Using the AutoConfiguration Adapter (ACA)
  • Page 4 Content Switching Switching Global Filters for MAC addresses Multicasts 4.3.1 Global Configuration 4.3.2 Unknown Multicasts 4.3.3 Known Multicasts 4.3.4 Settings per port (table) QoS/Priority Global Port configuration 5.2.1 Entering the port priority 802.1D/p Mapping IP DSCP mapping Redundancy Ring Redundancy 6.1.1 Configuring the HIPER-Ring 6.1.2 Configuring the MRP-Ring Diagnosis...
  • Page 5 Content 7.6.3 Device status 7.6.4 Configuring traps Alarms (Traps) Report Self Test Advanced DHCP Relay Agent Appendix Technical Data List of RFCs Based specifications and standards Copyright of integrated software A.4.1 Bouncy Castle Crypto APIs (Java) A.4.2 LVL7 Systems, Inc. Readers’...
  • Page 6 Content RM Web L2B Release 5.0 04/09...

  • Page 7: About This Manual

    About this Manual About this Manual The "Web-based Interface" reference manual contains detailed information on using the Web interface to operate the individual functions of the device. The "Command Line Interface" reference manual contains detailed informa- tion on using the Command Line Interface to operate the individual functions of the device.
  • Page 8 About this Manual RM Web L2B Release 5.0 04/09...

  • Page 9: Key

    The designations used in this manual have the following meanings: List Work step Subheading Link Indicates a cross-reference with a stored link Note: A note emphasizes an important fact or draws your attention to a dependency. ASCII representation in user interface Courier Symbols used: Router with firewall...
  • Page 10 A random computer Configuration Computer Server PLC - Programmable logic controller I/O - Robot RM Web L2B Release 5.0 04/09...

  • Page 11: Opening The Web-Based Interface

    Opening the Web-based Interface Opening the Web-based Interface To open the Web-based interface, you will need a Web browser (a program that can read hypertext), for example Mozilla Firefox version 1 or later, or Mi- crosoft Internet Explorer version 6 or later. Note: The Web-based interface uses the Java software version 5 or later (Ja- va™...
  • Page 12 Opening the Web-based Interface Establish the connection by entering the IP address of the device which you want to administer via the Web-based management in the address field of the Web browser. Enter the address in the following form: http://xxx.xxx.xxx.xxx The login window appears on the screen.
  • Page 13 Opening the Web-based Interface Note: The changes you make in the dialogs are copied to the device when you click on “Set”. Click on “Load” to update the display. Note: You can block your access to the device by entering an incorrect con- figuration.
  • Page 14 Opening the Web-based Interface The menu section displays the menu items. By placing the mouse pointer in the menu section and clicking the right mouse button you can use “Back” to return to a menu item you have already selected, or “Forward” to jump to a menu item you have already selected.

  • Page 15: Basic Settings

    Basic Settings 1 Basic Settings The basic settings menu contains the dialogs, displays and tables for basic settings configuration: System Network Software Port configuration Load/Save Restart RM Web L2B Release 5.0 04/09...

  • Page 16: System

    Basic Settings 1.1 System 1.1 System The „System“ submenu in the basic settings menu is structured as follows: Device status System data Device view Reloading data Figure 4: "System" submenu Device status This section of the website provides information on the device status and the alarm state of the device.
  • Page 17 Basic Settings 1.1 System Figure 5: Device status and alarm display 1 - Symbol indicates the Device Status 2 - Cause of the oldest existing alarm 3 - Time of the oldest existing alarm System data This area of the website displays the system parameters of the device. Here you can change, –...
  • Page 18 Basic Settings 1.1 System 1 2 3 Figure 6: Availability of the media modules 1 - Module present 2 - Empty slot 3 - Module was removed. Click this check mark to define this slot as an empty slot. Device view The device view shows the device with the current configuration.
  • Page 19 Basic Settings 1.1 System Figure 7: Device view Meaning of the symbols: The port (10, 100 Mbit/s, 1, 10 Gbit/s) is enabled and the connection is OK. The port is disabled by the management and it has a connection. The port is disabled by the management and it has no connection.
  • Page 20 Basic Settings 1.1 System Figure 8: Time until update RM Web L2B Release 5.0 04/09...

  • Page 21: Network

    Basic Settings 1.2 Network 1.2 Network With the Basic Settings:Network dialog you define the source from which the device gets its IP parameters after starting, and you assign the IP parameters and configure the HiDiscovery access. Figure 9: Network parameters dialog Under “Mode”, you enter where the device gets its IP parameters: In the BOOTP mode, the configuration is via a BOOTP or DHCP server on the basis of the MAC address of the device...
  • Page 22 Basic Settings 1.2 Network The HiDiscovery protocol allows you to allocate an IP address to the de- vice on the basis of its MAC address. Activate the HiDiscovery protocol if you want to allocate an IP address to the device from your PC with the en- closed HiDiscovery software (setting on delivery: operation “on”, access “read-write”).

  • Page 23: Software

    Basic Settings 1.3 Software 1.3 Software The software dialog enables you to view the software versions present on the device and to carry out a software update of the device via tftp or file selec- tion. Figure 10: Software dialog 1.3.1 View the software versions present on the device You can view:...

  • Page 24: Update Via File Selection

    Basic Settings 1.3 Software 1.3.2 Update via file selection For an update via a file selection window, the device software must be on a data carrier that you can access via your PC. In the file selection frame, click on “...”. In the file selection window, select the device software (device.bin) and click on “Open”.

  • Page 25: Port Configuration

    Basic Settings 1.4 Port configuration 1.4 Port configuration This configuration table allows you to configure every port of the device. In the “Name” column, you can enter a name for every port. In the “Ports on” column, you can switch on the port by selecting it here. In the “Propagate connection error”...
  • Page 26 Basic Settings 1.4 Port configuration Note: The following settings are required for the ring ports in a HIPER-Ring: Bit rate 100 Mbit/s 1000 Mbit/s Autonegotiation (automatic configuration) Port Duplex Full – Table 2: Port settings for ring ports Figure 11: Port Configuration Table dialog RM Web L2B Release 5.0 04/09...

  • Page 27: Load/Save

    Basic Settings 1.5 Load/Save 1.5 Load/Save With this dialog you can: load a configuration, save a configuration, enter a URL, restore the delivery configuration, use the ACA for configuring, Figure 12: Load/Save dialog RM Web L2B Release 5.0 04/09...

  • Page 28: Loading The Configuration

    Basic Settings 1.5 Load/Save 1.5.1 Loading the configuration In the "Load" frame, you have the option to load a configuration saved on the device, load a configuration stored under the specified URL, load a configuration stored on the specified URL and save it on the device, load a configuration saved on a PC in binary format.

  • Page 29: Url

    Basic Settings 1.5 Load/Save If you change the current configuration (for example, by switching a port off), the load/save symbol in the menu area changes from a disk symbol into a yellow triangle. After saving the configuration, the load/save symbol changes back into the disk symbol.

  • Page 30: Using The Autoconfiguration Adapter (Aca)

    Basic Settings 1.5 Load/Save 1.5.5 Using the AutoConfiguration Adapter (ACA) The ACAs are devices for saving the configuration data of a device. In the case of a device failure, an ACA enables the configuration data to be trans- ferred easily by means of a substitute device of the same type. Note: If you replace a device with DIP switches, please ensure that the DIP switch settings are identical.
  • Page 31 Basic Settings 1.5 Load/Save Status Meaning notPresent No ACA present. The configuration data from the ACA and the device are consistent. removed The ACA has been removed after booting. notInSync The configuration data from the ACA and the device are not consistent. outOfMemory The local configuration data is too extensive to be stored on the ACA.

  • Page 32: Restart

    Basic Settings 1.6 Restart 1.6 Restart With this dialog you can: Cold start the device. In a cold start, the device reloads the software from the non-volatile memory, restarts, and performs a self-test. Warm start the device. In this case the device checks the software in the volatile memory and restarts.
  • Page 33 Basic Settings 1.6 Restart Figure 13: Restart dialog RM Web L2B Release 5.0 04/09...
  • Page 34 Basic Settings 1.6 Restart RM Web L2B Release 5.0 04/09...

  • Page 35: Security

    Security 2 Security The security menu contains the dialogs, displays and tables for configuring the security settings: Password SNMPv1/v2 access Web access RM Web L2B Release 5.0 04/09...

  • Page 36: Password / Snmp Access

    Security 2.1 Password / SNMP Access 2.1 Password / SNMP Access This dialog gives you the option of changing the read and read/write pass- words for access to the device via the Web-based interface/CLI/SNMP. Please note that passwords are case-sensitive. For security reasons, the read password and the read/write password should not be identical.
  • Page 37 Security 2.1 Password / SNMP Access Note: For security reasons, the passwords are not displayed. Make a note of every change! You cannot access the device without a valid password! Note: For security reasons, SNMP version 3 encrypts the password. With the “SNMPv1”...

  • Page 38: Snmpv1/V2 Access Settings

    Security 2.2 SNMPv1/v2 Access Settings 2.2 SNMPv1/v2 Access Settings With this dialog you can select access via SNMPv1 or SNMPv2. In the state on delivery, both protocols are activated. You can thus manage the device with HiVision and communicate with earlier versions of SNMP.
  • Page 39 Security 2.2 SNMPv1/v2 Access Settings Binary notation of the mask 255.255.255.240: 1111 1111 1111 1111 1111 1111 1111 0000 mask bits Binary notation of the IP address 172.168.23.20: 1010 1100 1010 1000 0001 0111 0001 0100 The binary representation of the mask with the IP address yields an address range of: 1010 1100 1010 1000 0001 0111 0001 0000 bis...
  • Page 40 Security 2.2 SNMPv1/v2 Access Settings Figure 15: SNMPv1/v2 access dialog RM Web L2B Release 5.0 04/09...

  • Page 41: Web Access

    Security 2.3 Web Access 2.3 Web Access This dialog allows you to switch off the Web server on the device. Figure 16: Web access dialog 2.3.1 Description of Web access The Web server of the device allows you to configure the device by using the Web-based interface.
  • Page 42 Security 2.3 Web Access After the Web server has been switched off, it is no longer possible to login via a Web browser. The login in the open browser window remains active. Note: The Command Line Interface and this dialog allow you to reactivate the Telnet server.

  • Page 43: Time

    Time 3 Time With this dialog you can enter time-related settings independently of the time synchronization protocol selected. The “IEEE/SNTP time” displays the time with reference to Universal Time Coordinated (UTC). The time displayed is the same worldwide. Local time differences are not taken into account.
  • Page 44 Time The PTP reference clock gets its time either via SNTP or from its own clock. All other clocks favor using the PTP time as the source. Figure 17: Time dialog RM Web L2B Release 5.0 04/09...

  • Page 45: Sntp Configuration

    Time 3.1 SNTP configuration 3.1 SNTP configuration The Simple Network Time Protocol (SNTP) enables you to synchronize the system time in your network. The device supports the SNTP Server and SNTP Client functions. The SNTP server makes the UTC (Universal Time Coordinated) available. UTC is the time relating to the coordinated world time measurement.
  • Page 46 Time 3.1 SNTP configuration Parameter Meaning Anycast destination ad- Enter the IP address to which the SNTP server on the device sends the dress SNTP packets. VLAN ID Enter the VLAN to which the device may periodically send SNTP packets. Anycast send interval Enter the time interval at which the device sends SNTP packets (valid entries: 1 second to 3600 seconds, on delivery: 120 seconds).
  • Page 47 Time 3.1 SNTP configuration Note: If you are receiving the system time from an external/redundant server address, you do not accept any SNTP Broadcasts (see “Accept SNTP Broadcasts”). Otherwise you can never distinguish whether the device is displaying the time from the server entered, or that of an SNTP Broadcast packet.

  • Page 48: Ptp (Ieee 1588)

    Time 3.2 PTP (IEEE 1588) 3.2 PTP (IEEE 1588) Precise time management is required for running time-critical applications via a LAN. The IEEE 1588 standard with the Precision Time Protocol (PTP) describes a procedure that assumes one clock is the most accurate and thus enables precise synchronization of all clocks in an LAN.

  • Page 49: Switching

    Switching 4 Switching The switching menu contains the dialogs, displays and tables for configuring the switching settings: Switching Global Filters for MAC Addresses Rate Limiter Multicasts RM Web L2B Release 5.0 04/09...

  • Page 50: Switching Global

    Switching 4.1 Switching Global 4.1 Switching Global Variable Meaning Possible values State on delivery MAC address Display the MAC address of the device Aging Time (s) Enter the Aging Time for all dynamic 15-3825 entries in seconds. Table 9: Switching:Global dialog Figure 19: Switching Global RM Web L2B Release 5.0 04/09...

  • Page 51: Filters For Mac Addresses

    Switching 4.2 Filters for MAC addresses 4.2 Filters for MAC addresses The filter table for MAC addresses is used to display filters. Each row repre- sents one filter. Filters specify the way in which data packets are sent. They are created automatically by the device (learned status). Data packets whose destination address is entered in the table are sent from the receiving port to the ports marked in the table.

  • Page 52: Multicasts

    Switching 4.3 Multicasts 4.3 Multicasts With this dialog you can: activate/deactivate the IGMP protocol, configure the IGMP protocol globally and per port. Figure 21: Multicasts dialog 4.3.1 Global Configuration In this frame you can: activate/deactivate the IGMP protocol. RM Web L2B Release 5.0 04/09...

  • Page 53: Unknown Multicasts

    Switching 4.3 Multicasts Parameter Meaning Default setting IGMP Snooping Activate IGMP Snooping globally for the entire device. deselected disabled Deactivate IGMP Snooping globally for the entire device. selected If IGMP Snooping is switched off, then the device does not evaluate Query and Report packets received, and it sends (floods) received data packets with a Multi- cast address as the destination address to all ports.

  • Page 54: Known Multicasts

    Switching 4.3 Multicasts 4.3.3 Known Multicasts In this frame you define how the device sends packets with a known MAC/IP Multicast address that was learned through IGMP Snooping. Prerequisite: In the Switching:Multicasts:Global Settings dialog, the IGMP Snooping mode is selected. Parameter Meaning Value range...
  • Page 55 Switching 4.3 Multicasts Parameter Meaning Value range Default setting Module Module number for modular devices, otherwise 1. Port Port to which this entry applies. IGMP on Switch IGMP on/off for each port. on/off Switching IGMP off at a port prevents registration for this port.
  • Page 56 Switching 4.3 Multicasts Parameter Meaning Value range Default setting Static Query Port The device sends IGMP report mes- enable, disable sages to the ports at which it receives disable IGMP queries (default setting). This column allows you to also send IGMP report messages to other selected ports (enable).

  • Page 57: Qos/Priority

    QoS/Priority 5 QoS/Priority The device enables you to set how it evaluates the QoS/prioritizing information of incoming data packets: VLAN priority based on IEEE 802.1Q/ 802.1D (Layer 2) Type of Service (ToS) or DiffServ (DSCP) for IP packets (Layer 3) which QoS/prioritizing information it writes to outgoing data packets (e.g.

  • Page 58: Global

    QoS/Priority 5.1 Global 5.1 Global With this dialog you can: enter the IP-DSCP value for management packets in the range 0 to 63 (default setting: 0 (be/cs0)). In order for you to have full access to the management of the device, even when there is a high network load, the device enables you to prioritize management packets.
  • Page 59 QoS/Priority 5.1 Global the IP packets if the packets are to be sent with a VLAN tag. Based on the traffic class to which the IP packet was assigned (see above), the device assigns the new VLAN priority to the IP packet in accordance with table Example: Received IP packet with a DSCP value of 32 (cs4) is...

  • Page 60: Port Configuration

    QoS/Priority 5.2 Port configuration 5.2 Port configuration This dialog allows you to configure the ports. You can: assign a port priority to a port, Parameter Meaning Module Module of the device on which the port is located. Port Port to which this entry applies. Port priority Enter the port priority.

  • Page 61: Entering The Port Priority

    QoS/Priority 5.2 Port configuration 5.2.1 Entering the port priority Double-click on a cell in the “Port priority” column and enter the priority (0- According to the priority entered, the device assigns the data packets that it receives at this port to a traffic class (see table 16).

  • Page 62: D/P Mapping

    QoS/Priority 5.3 802.1D/p Mapping 5.3 802.1D/p Mapping The 802.1D/p mapping table allows you to assign a traffic class to every VLAN priority. Figure 24: 802.1D/p mapping table Enter the desired value from 0 to 3 in the Traffic Class field for every VLAN priority.
  • Page 63 QoS/Priority 5.3 802.1D/p Mapping VLAN Traffic class IEEE 802.1D traffic type priority (default setting) Best effort (default) Background Standard Excellent effort (business critical) Controlled load (streaming multimedia) Video, less than 100 milliseconds of latency and jitter Voice, less than 10 milliseconds of latency and jitter Network control reserved traffic Table 17: Assigning the VLAN priority to the four traffic classes Note: Network protocols and redundancy mechanisms use the highest traffic...

  • Page 64: Ip Dscp Mapping

    QoS/Priority 5.4 IP DSCP mapping 5.4 IP DSCP mapping The IP DSCP mapping table allows you to assign a traffic class to every DSCP value. Enter the desired value from 0 to 3 in the Traffic Class field for every DSCP value (0-63).
  • Page 65 QoS/Priority 5.4 IP DSCP mapping Default Forwarding/Best Effort: No particular prioritizing. DSCP value DSCP name Traffic class (default setting) Best Effort /CS0 9,11,13,15 10,12,14 AF11,AF12,AF13 17,19,21,23 18,20,22 AF21,AF22,AF23 25,27,29,31 26,28,30 AF31,AF32,AF33 33,35,37,39 34,36,38 AF41,AF42,AF43 41,42,43,44,45,47 49-55 57-63 Table 18: Mapping the DSCP values onto the traffic classes RM Web L2B Release 5.0 04/09...
  • Page 66 QoS/Priority 5.4 IP DSCP mapping RM Web L2B Release 5.0 04/09...

  • Page 67: Redundancy

    Redundancy 6 Redundancy Under Redundancy you will find all the dialogs and views for configuring and monitoring the redundancy function: Ring Redundancy RM Web L2B Release 5.0 04/09...

  • Page 68: Ring Redundancy

    Within a HIPER-Ring, you can use any combination of the following devices: – RS1 – RS2-./. – RS2-16M – RS2-4R – RS20, RS30, RS40 – RSR20, RSR30 – OCTOPUS – MICE – MS20, MS30 – Power MICE – MACH 100 –...
  • Page 69 Redundancy 6.1 Ring Redundancy Enable/disable the Ring Manager function. Receive Ring information. Delete the Ring Redundancy. Note: Enabled Ring Redundancy methods on a device are mutually exclu- sive at any one time. When changing to another Ring Redundancy method, deactivate the function for the time being. Parameter Meaning Version...

  • Page 70: Configuring The Hiper-Ring

    Redundancy 6.1 Ring Redundancy 6.1.1 Configuring the HIPER-Ring For the ring ports, select the following basic settings in the Basic Set- tings:Port Configuration dialog: Bit rate 100 Mbit/s 1000 Mbit/s Autonegotiation (automatic configuration) Port Duplex Full – Table 20: Port settings for ring ports Note: Configure all the devices of the HIPER-Ring individually.

  • Page 71: Configuring The Mrp-Ring

    Otherwise you activate the advanced Manager mode. (Ring Manag- Note: All Hirschmann devices that support the MRP-Ring also support the ad- vanced mode. Operation When you have configured all the parameters for the MRP-Ring, you switch the operation on here.
  • Page 72 Redundancy 6.1 Ring Redundancy Parameter Meaning VLAN ID If you have configured VLANs, you select VLAN ID 0 here if you do not want to assign the MRP-Ring configuration to a VLAN. Note the VLAN configuration of the ring ports: Select for VLAN ID 1 and VLAN membership U in the static VLAN table for the ring ports.

  • Page 73: Diagnosis

    Diagnosis 7 Diagnosis The diagnosis menu contains the following tables and dialogs: Event Log Ports (statistics, utilization, SFP modules) Topology Discovery Port Mirroring Device Status Signal Contact Alarms (Traps) Report (log file, system information) IP Address Conflict Detection Self Test In service situations, they provide the technician with the necessary informa- tion for diagnosis.

  • Page 74: Event Log

    Diagnosis 7.1 Event log 7.1 Event log The table under Event Log lists all the events with a time stamp. The "Delete" button allows you to delete the contents of the Event Log window. Figure 26: Event log table RM Web L2B Release 5.0 04/09...

  • Page 75: Ports

    Diagnosis 7.2 Ports 7.2 Ports The port menu contains displays and tables for the individual ports: Statistics table Utilization SFP Modules 7.2.1 Statistics table This table shows you the contents of various event counters. In the Restart menu item, you can reset all the event counters to zero using "Warm start", "Cold start"...

  • Page 76: Utilization

    Diagnosis 7.2 Ports 7.2.2 Utilization This table displays the network load of the individual ports. In the “Upper Threshold[%]” column you enter the top threshold value for net- work load. If this threshold value is exceeded, the device sets a check mark in the “Alarm”...

  • Page 77: Sfp Modules

    Diagnosis 7.2 Ports 7.2.3 SFP modules The SFP status display allows you to look at the current SFP module connec- tions and their properties. The properties include: Parameter Meaning Module Module of the device on which the port is located. Port Port to which this entry applies.

  • Page 78: Topology Discovery

    Diagnosis 7.3 Topology Discovery 7.3 Topology Discovery This dialog allows you to switch on/off the topology discovery function (LL- DP). The topology table shows you the collected information for neighboring devices. This information enables the network management station to map the structure of your network.
  • Page 79 Diagnosis 7.3 Topology Discovery devices without active topology discovery function are connected to a port, the topology table hides the devices without active topology discovery. only devices without active topology discovery are connected to a port, the table will contain one line for this port to represent all devices. This line contains the number of connected devices MAC addresses of devices that the topology table hides for the sake of clarity, are located in the address table (FDB),...

  • Page 80: Port Mirroring

    Diagnosis 7.4 Port Mirroring 7.4 Port Mirroring This dialog allows you to configure and activate the port mirroring function of the device. In port mirroring, the valid data packets of one port, the source port, are copied to another, the destination port. The data traffic at the source port is not influenced by port mirroring.
  • Page 81 Diagnosis 7.4 Port Mirroring Figure 31: Port Mirroring dialog RM Web L2B Release 5.0 04/09...

  • Page 82: Device Status

    Diagnosis 7.5 Device Status 7.5 Device Status The device status provides an overview of the overall condition of the device. Many process visualization systems record the device status for a device in order to present its condition in graphic form. Figure 32: Device State dialog (for power MICE) In the "Monitoring"...
  • Page 83 Diagnosis 7.5 Device Status The events which can be selected are: Name Meaning Power supply ... Monitor/ignore supply voltage(s). Temperature Monitor/ignore temperature thresholds set (see on page „System“) temperatures that are too high/too low ACA removal Monitor/ignore the removal of the ACA. Connection error Monitor/ignore the defective link status of at least one port.

  • Page 84: Signal Contact

    Diagnosis 7.6 Signal contact 7.6 Signal contact The signal contacts are used for controlling external devices by manually setting the signal contacts, monitoring the functions of the device, reporting the device state of the device. 7.6.1 Manual setting Select the tab page "Alarm 1" or "Alarm 2" (for devices with two signal contacts).
  • Page 85 Diagnosis 7.6 Signal contact In the “Mode Signal contact” field, you select the “Monitoring correct op- eration” mode. In this mode the signal contacts monitor the functions of the device, thus enabling remote diagnosis. A break in contact is reported via the potential-free signal contact (relay contact, closed circuit): Voltage supply 1/2 failure or continuous device malfunction (internal volt- age).

  • Page 86: Device Status

    Diagnosis 7.6 Signal contact 7.6.3 Device status Select the tab page “Alarm 1” or “Alarm 2” (for devices with two signal contacts). In the “Mode Signal Contact” field, you select the “Device status” mode. In this mode, the signal contact is used to monitor the status of the device (see on page 82 „Device Status“)

  • Page 87: Alarms (Traps)

    Diagnosis 7.7 Alarms (Traps) 7.7 Alarms (Traps) This dialog allows you to determine which events trigger an alarm (trap) and where these alarms should be sent. Select „Create entry“. In the „Address“ column, enter the IP address of the management station to which the traps should be sent.
  • Page 88 Diagnosis 7.7 Alarms (Traps) Figure 34: Alarms dialog RM Web L2B Release 5.0 04/09...

  • Page 89: Report

    Diagnosis 7.8 Report 7.8 Report The following reports are available for the diagnostics: file. The log file is an HTML file in which the device writes all the important de- vice-internal events. System information. The system information is an HTML file containing all system-relevant da- RM Web L2B Release 5.0 04/09...

  • Page 90: Self Test

    Diagnosis 7.9 Self Test 7.9 Self Test With this dialog you can: activate/deactivate the RAM test for a cold start of the device. Deactivat- ing the RAM test shortens the booting time for a cold start of the device. allow or prevent a restart due to an undefined software state. Figure 35: Self-test dialog RM Web L2B Release 5.0 04/09...

  • Page 91: Advanced

    Advanced 8 Advanced The menu contains the dialogs, displays and tables for: DHCP Relay Agent RM Web L2B Release 5.0 04/09...

  • Page 92: Dhcp Relay Agent

    This results in the entry for the “Hardware address” in the DHCP server: B306000001000101000600806300061E In the “Option 82 on” column, you can switch this function on/off for each port. In the “Hirschmann Device” column, you mark the ports to which a Hir- schmann device is connected. RM Web L2B Release 5.0 04/09...
  • Page 93 Advanced 8.1 DHCP Relay Agent Figure 36: DHCP Relay Agent dialog RM Web L2B Release 5.0 04/09...
  • Page 94 Advanced 8.1 DHCP Relay Agent RM Web L2B Release 5.0 04/09...

  • Page 95: A Appendix

    Appendix A Appendix RM Web L2B Release 5.0 04/09...

  • Page 96: Technical Data

    Appendix A.1 Technical Data A.1 Technical Data Switching Size of MAC address table 8000 (incl. static filters) Max. number of statically configured MAC address filters Max. number of MAC address filters learnable via GMRP/IGMP Snooping Max. length of over-long packets 1632 (from 03.0.00) RM Web L2B...

  • Page 97: List Of Rfcs

    Appendix A.2 List of RFCs A.2 List of RFCs RFC 768 (UDP) RFC 783 (TFTP) RFC 791 (IP) RFC 792 (ICMP) RFC 793 (TCP) RFC 826 (ARP) RFC 854 (Telnet) RFC 855 (Telnet Option) RFC 951 (BOOTP) RFC 1112 (IGMPv1) RFC 1157 (SNMPv1) RFC 1155...
  • Page 98 Appendix A.2 List of RFCs RFC 2575 (View Based Access Control Model for SNMP) RFC 2576 (Coexistence between SNMP v1, v2 & v3) RFC 2578 (SMI v2) RFC 2579 (Textual Conventions for SMI v2) RFC 2580 (Conformance statements for SMI v2) RFC 2613 (SMON) RFC 2618...

  • Page 99: Based Specifications And Standards

    Appendix A.3 Based specifications and standards A.3 Based specifications and standards IEEE 802.1 AB Topology Discovery (LLDP) IEEE 802.1 af Power over Ethernet IEEE 802.1 D Switching, GARP, GMRP, Spanning Tree (Supported via 802.1S implementation) IEEE 802.1 D-1998 Media access control (MAC) bridges (includes IEEE 802.1p Priority and Dynamic Multicast Filtering, GARP, GMRP) IEEE 802.1 Q-1998...

  • Page 100: Copyright Of Integrated Software

    Appendix A.4 Copyright of integrated software A.4 Copyright of integrated software A.4.1 Bouncy Castle Crypto APIs (Java) The Legion Of The Bouncy Castle Copyright (c) 2000 - 2004 The Legion Of The Bouncy Castle (http://www.bouncycastle.org) Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies...

  • Page 101: Lvl7 Systems, Inc

    Appendix A.4 Copyright of integrated software A.4.2 LVL7 Systems, Inc. (c) Copyright 1999-2006 LVL7 Systems, Inc. All Rights Reserved. RM Web L2B Release 5.0 04/09...
  • Page 102 Appendix A.4 Copyright of integrated software RM Web L2B Release 5.0 04/09...

  • Page 103: B Readers' Comments

    Readers’ comments B Readers’ comments What is your opinion of this manual? We are always striving to provide as comprehensive a description of our product as possible, as well as important information that will ensure trouble-free operation. Your comments and suggestions help us to further improve the quality of our documentation.
  • Page 104 E-mail: Date / Signature: Dear User, Please fill out and return this page as a fax to the number +49 (0)7127/14-1600 or Hirschmann Automation and Control GmbH Department AED Stuttgarter Str. 45-51 72654 Neckartenzlingen RM Web L2B Release 5.0 04/09...

  • Page 105: Index

    Index C Index 27, 87 Java Runtime Environment Advanced JavaScript Alarm Assured Forwarding LLDP AutoConfiguration Adapter Login Broadcast Media module Multicast Cable crossing Class Selector Network load Network Management Software Clock Cold start Configuring the HIPER-Ring Configuring the MRP-Ring Option 82 Destination port Password 12, 36, 37...
  • Page 106 Index Ring Redundancy Website Ring Redundancy basic configuration Write access Ring structure Ringport RM function RMON probe Security Self-test SFP Module SFP Modules SFP status display Signal contact 84, 87 SNMP SNTP client SNTP request SNTP server Source port Statistics table Supply voltage Switching Switching Global Dialog...

  • Page 107: D Further Support

    Further support D Further support Technical questions and training courses In the event of technical queries, please contact your local Hirschmann distributor or Hirschmann office. You can find the addresses of our distributors on the Internet: www.hirschmann-ac.com. Our support line is also at your disposal: Tel.

Table of Contents