Storm-Control Ingress-Limit; Storm-Control Ingress-Mode - Hirschmann RS20 Reference Manual

4.6.65 storm-control ingress-limit

Sets the ingress rate limit in kbit/s. "0" means: no limit.
Format
storm-control ingress-limit <max. ingress rate>
Mode
Interface Config

4.6.66 storm-control ingress-mode

Note: This command is available for the RS20/RS30/RS40, MS20/MS30,
OCTOPUS devices.
This command sets the frame type for the ingress limiter to:
All, BC, BC+MC, BC+MC+uUC.
Format
storm-control ingress-mode {all | bc | mc+bc |
uuc+mc+bc}
Mode
Interface Config
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
193