Snmptrap Snmpversion - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.56 snmptrap snmpversion

This command configures SNMP trap version for a specified community.
Format
snmptrap snmpversion <name> <ipAddr>
{snmpv1 | snmpv2}
Mode
Global Config
name
Enter the community name.
ipAaddr
Enter the IP Address.
snmpv1
Use SNMP v1 to send traps.
snmpv2
Use SNMP v2 to send traps.
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
123