Snmptrap - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.53 snmptrap

This command adds an SNMP trap name. The maximum length of name is
32 case-sensitive alphanumeric characters.
Default
The default name for the six undefined community names is Delete.
Format
snmptrap <name> <ipaddr> [snmpversion snmpv1]
Mode
Global Config
no snmptrap
U
This command deletes trap receivers for a community.
Format
no snmptrap <name> <ipaddr>
Mode
Global Config
120
4.4 Management Commands
Release 8.0 05/2013
CLI L2E