Show Storm-Control; Show Storm-Control Limiters Port - Hirschmann RS20 Reference Manual

4.6.48 show storm-control

This command displays switch configuration information.
Format
show storm-control
Mode
Privileged EXEC and User EXEC
Ingress Limiting
May be enabled or disabled. The factory default is disabled.
Ingress Limiter Mode
Note: This command is available for the MACH4000 and PowerMICE
devices.
Sets the global mode for the ingress limiter. The factory default is:
Broadcasts only.
Egress Broadcast Limiting
May be enabled or disabled. The factory default is disabled.
Egress Limiting (all traffic)
May be enabled or disabled. The factory default is disabled.
802.3x Flow Control Mode
May be enabled or disabled. The factory default is disabled.

4.6.49 show storm-control limiters port

This command displays the limiter settings per port. "0" means that the re-
spective limiter is disabled.
Format
show storm-control limiters port {<slot/port>|all}
Mode
Privileged EXEC and User EXEC
Ingress Mode
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
179