CLI Commands: Base
4.1.26 utilization alarm-threshold
Use this command to add the alarm threshold value for monitoring bandwidth
utilization of the interface.
Format
utilization alarm-threshold
{lower <0..10000> | upper <0..10000>}
Mode
Interface Config
lower
Enter lower utilization alarm threshold in the range of 0..10000
where 10000 represents 100%.
upper
Enter upper utilization alarm threshold in the range of 0..10000
where 10000 represents 100%.
CLI L2E
Release 8.0 05/2013
4.1 System Information and Statistics
69