Dip-Switch Operation - Hirschmann RS20 Reference Manual

4.6.7 dip-switch operation

Note: This command is available for the MICE, PowerMICE and RS20/
RS30/RS40 devices.
Use this command to enable/disable the DIP switch configuration.
Default
disabled
Format
dip-switch operation { enable | disable }
Mode
Global Config
enable
Enable the DIP switch configuration.
disable
Disable the DIP switch configuration.
The device ignores DIP switch settings.
142
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013