Show Monitor Session - Hirschmann RS20 Reference Manual

4.6.44 show monitor session

This command displays the port monitoring information for the system.
Format
show monitor session <Session Number>
Mode
Global Config, Privileged EXEC, User EXEC
Session
Display port monitor session settings.
Session Number
Session number. Enter 1 for the session number.
Session ID
Displays the session number of the port monitor session.
Possible values: 1.
Admin Mode
Displays the status of the port monitoring feature.
Possible values: Enable, Disable.
Probe Port
Displays the interface configured as the probe port (in slot/port nota-
tion). If this value has not been configured, 'Not Configured' will be
displayed.
Mirrored Port
Displays the interface configured as the mirrored port (in slot/port
notation). If this value has not been configured, 'Not Configured'
will be displayed.
Direction
Displays the direction which has been configured for the port.
Possible values: rx (receive), tx (transmit), rx/tx (receive and
transmit)
If this value has not been configured, 'Not Configured' will be
displayed.
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
175