Snmp-Access Version V3-Encryption - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.35 snmp-access version v3-encryption

Use this command to activate/deactivate SNMPv3 data encryption.
Format
snmp-access version v3-encryption
Mode
Global Config
disable
Disable SNMP access to this switch by SNMPv3 protocol version.
enable
Enable SNMP read and write access to this switch by SNMPv3
protocol version.
readonly
Enable SNMP read-only access to this switch (disable write access)
by SNMPv33 protocol version.
readwrite
Enable SNMP read-write access to this switch (enable write access)
by SNMPv3 protocol version.
CLI L2E
Release 8.0 05/2013
{readonly | readwrite} {enable | disable}
4.4 Management Commands
105