Show Interface Utilization - Hirschmann RS20 Reference Manual
Command line interface industrial ethernet gigabit switch
Hide thumbs
Also See for RS20:
- Reference manual (572 pages) ,
- User manual (294 pages) ,
- Programming manual (116 pages)
Table of Contents
Advertisement
CLI Commands: Base
4.1.18 show interface utilization
This command displays the utilization statistics for the entire device.
Format
show interface utilization
Mode
Global Config
Interface
Display port number in <slot/port> notation.
Utilization
Display the utilization on this port.
Possible values: 0..100.00%
Lower threshold
Display the lower threshold setting for the utilization statistics on this
port.
Possible values: 0..100.00%
Upper threshold
Display the upper threshold setting for the utilization statistics on this
port.
Possible values: 0..100.00%
Alarm condition
Display the alarm condition setting for the utilization statistics on this
port.
Possible values: true, false
CLI L2E
Release 8.0 05/2013
4.1 System Information and Statistics
59
Advertisement
Table of Contents
