Snmp-Server Contact - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.38 snmp-server contact

This command adds a new SNMP server contact.
Format
snmp-server contact <con>
Mode
Global Config
con
Enter system contact up to 63 characters in length.
If the name contains spaces, enclose it in quotation marks (").
no snmp-server contact
U
This command removes this SNMP server contact from the table.
<con> is the SNMP server contact to be deleted.
Format
no snmp-server contact <con>
Mode
Global Config
108
4.4 Management Commands
Release 8.0 05/2013
CLI L2E