Storm-Control Ingress-Limiting; Storm-Control Ingress-Mode - Hirschmann RS20 Reference Manual

4.6.61 storm-control ingress-limiting

This command enables or disables the ingress limiter globally.
Format
storm-control ingress-limiting {disable | enable}
Mode
Global Config

4.6.62 storm-control ingress-mode

Note: This command is available for the MACH4000 and PowerMICE
devices.
This command sets the frame type for the ingress limiter globally to:
BC or BC+MC.
Format
storm-control ingress-mode {bc | mc+bc}
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
191