CLI Commands: Base
4.4.58 telnetcon timeout
This command sets the telnet connection session timeout value, in minutes.
A session is active as long as the session has not been idle for the value set.
The time is a decimal value from 1 to 160.
Default
5
Format
telnetcon timeout <1-160>
Mode
Privileged EXEC
no telnetcon timeout
U
This command sets the telnet connection session timeout value to the
default.
Changing the timeout value for active sessions does not become effec-
tive until the session is reaccessed. Also, any keystroke activates the
new timeout duration.
Format
no telnetcon timeout
Mode
Privileged EXEC
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
125