Installing The Sfp Modules (Optional); Insert Data In Label Area; Connecting The Terminal Blocks For Supply Voltage And Signal Contact - Hirschmann RSB20-0800T1T1 User Manual

2.1.2

Installing the SFP modules (optional)

1
Figure 1: 1 - Fast ETHERNET fiber optic SFP module
 Before attaching an SFP module, first remove the protective cap over the
socket.
 Push the SFP module with the lock closed into the socket until it latches
audibly in place.
Note: Only use Hirschmann SFP modules
2.1.3

Insert data in label area

The information field for the IP address on the front of the device helps you
to structure your network installation clearly.
Label area for IP address of device
1
2
2.1.4 Connecting the terminal blocks for supply voltage
and signal contact
The supply voltage and the signal contact are connected via a 6-pin terminal
block with a snap lock.
18
(see page 32
1 IP address of device (label area)
2 MAC address of device (label)
"Accessories").
RSB20
Release 20 09/11