Show Dip-Switch - Hirschmann RS20 Reference Manual
Command line interface industrial ethernet gigabit switch
Hide thumbs
Also See for RS20:
- Reference manual (572 pages) ,
- User manual (294 pages) ,
- Programming manual (116 pages)
Table of Contents
Advertisement
s
4.6.37
how dip-switch
This command displays the DIP switch operation configuration.
Format
show dip-switch
Mode
Global Config
DIP Switch operation
This field displays the DIP Switch operation status.
Possible values: Enabled, Disabled
DIP Switch conflict
This field displays the DIP Switch conflict status.
Possible values: True, False
DIP Switch Red. Manager
This field displays the DIP Switch Redundancy Manager status.
Possible values: Enabled, Disabled
DIP Switch Standby
This field displays the DIP Switch Standby status.
Possible values: Enabled, Disabled
DIP Switch RingPort
Note: This command is available for the MICE devices.
This field displays the DIP Switch RingPort numbers.
Possible values: Interface number in slot/port notation.
DIP Switch SW config
Note: This command is available for the MICE devices.
This field displays the DIP Switch SW config status.
Possible values: Enabled, Disabled
168
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013
Advertisement
Table of Contents
