4.9.22 lldp fdb-mode
Configure the port's LLDP FDB mode.
The default setting is autodetect.
Format
lldp fdb-mode <{lldp-only|mac-only|lldp-and-
mac|autodetect}>
Mode
Interface Config
4.9.23 lldp hm-mode
Configure the port's LLDP Hirschmann mode (if LLDP/IEEE802.1AB frames
will be transmitted to and/or received from the Hirschmann-specific multicast
address 01:80:63:2f:ff:0b).
The default setting is tx-and-rx.
Format
lldp hm-mode <{tx-only|rx-only|tx-and-rx|off}>
Mode
Interface Config
CLI L2E
Release 8.0 05/2013
4.9 LLDP - Link Layer Discovery Protocol
257