Show Sntp Operation - Hirschmann RS20 Reference Manual

disable-after-sync
Show if the SNTP client will be disabled once it is synchronized to the
time server.
offset
Show the local time's offset (in minutes) with respect to UTC (positive
values for locations east of Greenwich).
request-interval
Show the SNTP Client's request interval (unit: seconds).
server
Show the SNTP Client's server IP addresses.
server primary
Show the SNTP Client's primary server IP addresses.
server secondary
Show the SNTP Client's redundant server IP addresses.
server threshold
Show the SNTP Client's threshold in milliseconds.

4.10.4 show sntp operation

This command shows if the SNTP function is enabled or disabled.
Format
show sntp operation
Mode
Privileged EXEC and User EXEC
CLI L2E
Release 8.0 05/2013
4.10 SNTP - Simple Network Time Protocol
269