Set Igmp Forward-All - Hirschmann RS20 Reference Manual

4.6.18 set igmp forward-all

This command activates the forwarding of multicast frames to this interface
even if the given interface has not received any reports by hosts. N. B.: this
applies only to frames that have been learned via IGMP Snooping. The pur-
pose is that an interface (e. g. a HIPER Ring's ring port) may need to forward
all such frames even if no reports have been received on it. This enables fast-
er recovery from ring interruptions for multicast frames.
Default
disabled
Format
set igmp forward-all
Mode
Interface Config
no set igmp forward-all
U
This command disables the forwarding of all multicast frames learned via
IGMP Snooping on a selected interface.
Format
no set igmp forward-all
Mode
Interface Config
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
153