Name - Hirschmann RS20 Reference Manual

4.9.44 name

Set or remove a descriptive name for the current interface
(physical ports only).
Format
name <descriptive name>
Mode
Interface Config
<descriptive name>
Enter a descriptive name for the current interface (physical ports
only). Max. length is 20 characters.
Note: If it contains blanks or exclamation marks (!), enclose it in quo-
tation marks ("). The description itself must not contain any quotation
marks (' or "), question marks (?) or backslashes (\).
no name
U
Delete the descriptive name for the current interface (physical ports
only).
Format
no name
Mode
Interface Config
CLI L2E
Release 8.0 05/2013
4.9 LLDP - Link Layer Discovery Protocol
265