CLI Commands: Base
4.4.48 snmp-server enable traps l2redundancy
Indicates whether traps that are related to the layer 2 redundancy features of
the switch will be sent. The HiPER-Ring and the Redundant Coupling will tell
you with these traps when the main line has become inoperative or returned.
May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps l2redundancy
Mode
Global Config
no snmp-server enable traps l2redundancy
U
This command disables layer 2 redundancy traps for the entire switch.
Format
no snmp-server enable traps l2redundancy
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
115