Set Igmp Querier Max-Response-Time; Set Igmp Querier Protocol-Version - Hirschmann RS20 Reference Manual

4.6.26 set igmp querier max-response-time

Configure the IGMP Snooping Querier's maximum response time. The range
is 1 to 3,598 seconds. The default value is 10 seconds.
Default
10
Format
set igmp querier max-response-time <1-3598>
Mode
Global Config
Note: The IGMP Snooping max. response time was also set. It is always the
same value as the IGMP Querier´s max. response time.

4.6.27 set igmp querier protocol-version

Configure the IGMP Snooping Querier's protocol version (1, 2 or 3).
Default
2
Format
set igmp querier protocol-version {1 | 2 | 3}
Mode
Global Config
160
4.6 Device Configuration Commands
CLI L2E
Release 8.0 05/2013