Logout; Ping - Hirschmann RS20 Reference Manual

4.8.22 logout

This command closes the current telnet connection or resets the current se-
rial connection.
Note: Save configuration changes before logging out.
Format
logout
Mode
Privileged EXEC

4.8.23 ping

This command checks if another computer is on the network and listens for
connections. To use this command, configure the switch for network (in-
band) connection. The source and target devices must have the ping utility
enabled and running on top of TCP/IP. The switch can be pinged from any IP
workstation with which the switch is connected through the default VLAN
(VLAN 1), as long as there is a physical path between the switch and the
workstation. The terminal interface sends, three pings to the target station.
Format
ping <ipaddr>
Mode
Privileged EXEC and User EXEC
236
4.8 System Utilities
CLI L2E
Release 8.0 05/2013