Bridge Vlan-Learning; Ethernet-Ip - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.8 bridge vlan-learning

With "independent" you set the Shared VLAN Learning mode to Indepen-
dent. The switch will treat equal MAC source addresses from different VLANs
as separate addresses.
With "shared" you set the Shared VLAN Learning mode to Shared. The
switch will treat equal MAC source addresses from different VLANs as the
same adress.
Format
bridge vlan-learning {independent|shared}
Mode
Global Config

4.4.9 ethernet-ip

This command controls the EtherNet/IP function on the switch.
Detailed information you can find in the User Manual Industrial Protocols.
Default
depends on the order code (standard = disable)
Format
ethernet-ip admin-state {enable | disable}
Mode
Global Config
Admin-state
disable: Disables the EtherNet/IP function on this device.
Note: The relevant MIB objects are still accessible.
enable: Enables the EtherNet/IP function on this device.
84
4.4 Management Commands
Release 8.0 05/2013
CLI L2E