Media-Module - Hirschmann RS20 Reference Manual

4.6.6 media-module

Use this command to logically configure media modules.
Default
media-module enable all
Format
media-module { remove <1-7> |
Mode
Global Config
remove
Logically remove a media-module that has already been physically
removed.
<1-7>
Enter the number of a media module that has already been physically
removed but is logically still present in the configuration.
enable
Enable a media-module slot.
<1-7>
Enter the number of the media module to be enabled.
all
Enable all media modules on the device.
disable
Disable a media-module slot.
<1-7>
Enter the number of the media module to be disabled.
all
Disable all media modules on the device.
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
enable { <1-7> | all } |
disable { <1-7> | all } }
141