Profinetio - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.19 profinetio

This command controls the PROFINET IO function on the switch.
Detailed information you can find in the User Manual Industrial Protocols.
Default
depends on the order code (standard = disable)
Format
profinetio admin-state {enable | disable}
Mode
Global Config
Admin-state
disable Disables the PROFINET IO function on this device.
Note: The relevant MIB objects are still accessible.
enable Enables the PROFINET IO function on this device.
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
91