Show Loginsession - Hirschmann RS20 Reference Manual

4.7.2 show loginsession

This command displays current telnet and serial port connections to the
switch.
Format
show loginsession
Mode
Privileged EXEC and User EXEC
ID
Login Session ID
User Name
The name the user will use to login using the serial port or Telnet. A
new user may be added to the switch by entering a name in a blank
entry. The user name may be up to 8 characters, and is not case sen-
sitive. Two users are included as the factory default, 'admin' and
'user'.
Connection From
IP address of the telnet client machine or EIA-232 for the serial port
connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
CLI L2E
Release 8.0 05/2013
4.7 User Account Management Commands
211