Show Lldp Remote-Data - Hirschmann RS20 Reference Manual

sys-desc
Display the port's LLDP TLV inclusion of System Description.
sys-name
Display the port's LLDP TLV inclusion of System Name.
vlan-name
Display the port's LLDP TLV inclusion of VLAN Name.

4.9.12 show lldp remote-data

This command shows all LLDP remote-data settings and states concerning
one or all ports.
Format
show lldp remote-data <{slot/port|all}>
chassis-id | detailed | ether-port-info |
inlinepower | link-aggregation-info |
mgmt-addr | profinetio-port-info |
port-desc | port-id | summary | sys-desc |
sys-name | vlan-info
Mode
Privileged EXEC and User EXEC
chassis-id
Display the remote data's chassis ID only.
detailed
Display remote data in detailed format (i. e., all available data).
Note: most important data is output first (not in alphabetic order of
command names). This is the default command if no specific
command is given.
ether-port-info
Display the remote data's port Ethernet properties only (group com-
mand, outputs: Port Autoneg. Supported, Port Autoneg. Enabled,
250
4.9 LLDP - Link Layer Discovery Protocol
CLI L2E
Release 8.0 05/2013