Auto-Disable Timer - Hirschmann RS20 Reference Manual

4.6.2 auto-disable timer

This command defines the time after which a deactivated port is activated
again.
Default
0
Format
auto-disable timer {0 | 30..2147483}
Mode
Interface Config
{0 | 30..2147483}
Timer value in seconds after a deactivated port is activated again.
Possible values:
The value 0 disables the timer.
0
30..2147483.
CLI L2E
Release 8.0 05/2013
4.6 Device Configuration Commands
137