Snmp-Server Community Ipaddr - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.39 snmp-server community ipaddr

This command sets a client IP address for an SNMP community. The ad-
dress is the associated community SNMP packet sending address and is
used along with the client IP mask value to denote a range of IP addresses
from which SNMP clients may use that community to access the device. A
value of 0.0.0.0 allows access from any IP address. Otherwise, this value is
ANDed with the mask to determine the range of allowed client IP addresses.
The name is the applicable community name.
Default
0.0.0.0
Format
snmp-server community ipaddr <ipaddr> <name>
Mode
Global Config
no snmp-server community ipaddr
U
This command sets a client IP address for an SNMP community to
0.0.0.0. The name is the applicable community name.
Format
no snmp-server community ipaddr <name>
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
109