Snmptrap Mode - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.55 snmptrap mode

This command activates or deactivates an SNMP trap. Enabled trap receiv-
ers are active (able to receive traps). Disabled trap receivers are inactive (not
able to receive traps).
Format
snmptrap mode <name> <ipaddr>
Mode
Global Config
no snmptrap mode
U
This command deactivates an SNMP trap. Disabled trap receivers are
inactive (not able to receive traps).
Format
no snmptrap mode <name> <ipaddr>
Mode
Global Config
122
4.4 Management Commands
Release 8.0 05/2013
CLI L2E