4.10.2 show sntp anycast
This command shows all SNTP anycast configuration settings.
Format
show sntp anycast [address|transmit-interval|vlan]
Mode
Privileged EXEC and User EXEC
address
Show the SNTP server's anycast destination IP Address.
transmit-interval
Show the SNTP Server's interval for sending Anycast messages
(unit: seconds).
vlan
Show the SNTP server's Anycast VLAN ID (used for sending Anycast
messages).
4.10.3 show sntp client
This command shows all SNTP anycast configuration settings.
Format
show sntp client [accept-broadcast|
Mode
Privileged EXEC and User EXEC
accept-broadcast
Show if the SNTP Client accepts SNTP broadcasts.
268
4.10 SNTP - Simple Network Time Protocol
disable-after-sync|
offset|
request-interval|
server<primary|secondary>|
threshold]
CLI L2E
Release 8.0 05/2013