Snmp-Server Community - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.4.37 snmp-server community

This command adds a new SNMP community name. A community name is
a name associated with the switch and with a set of SNMP managers that
manage it with a specified privileged level. The length of name can be up to
32 case-sensitive characters.
Note: Community names in the SNMP community table must be unique.
When making multiple entries using the same community name, the first
entry is kept and processed and all duplicate entries are ignored.
Default
Two default community names: Public and Private. You can replace
these default community names with unique identifiers for each com-
munity. The default values for the remaining four community names
are blank.
Format
snmp-server community <name>
Mode
Global Config
no snmp-server community
U
This command removes this community name from the table. The name
is the community name to be deleted.
Format
no snmp-server community <name>
Mode
Global Config
CLI L2E
Release 8.0 05/2013
4.4 Management Commands
107